D-58
API Mnemonic Operands Function
12 MOV P S, D Move
Type
OP
Bit Devices Word devices Program Steps
X Y M K H KnX KnY KnM T C D MOV, MOVP: 5 steps
S * * * * * * * *
D * * * * *
Operands:
S: Source of data D: Destination of data
Explanations:
1. See the specifications of each model for their range of use.
2. When this instruction is executed, the content of S will be moved directly to D. When this
instruction is not executed, the content of D remains unchanged.
Program Example:
MOV instruction has to be adopted in the moving of 16-bit data.
1. When X0 = Off, the content in D10 will remain unchanged. If X0 = On, the value K10 will
be moved to D10 data register.
2. When X1 = Off, the content in D10 will remain unchanged. If X1 = On, the present value
T0 will be moved to D10 data register.
X0
K10MOV D0
X1
T0MOV D10
API Mnemonic Operands Function
15 BMOV P S, D, n Block Move
Type
OP
Bit Devices Word devices Program Steps
X Y M K H KnX KnY KnM T C D BMOV, BMOVP: 7 steps
S * * * * * *
D * * * * *
n * * * * *
Operands:
S: Start of source devices D: Start of destination devices n: Number of data to be moved
Explanations:
To Next Page
Loading...
Need help?
General
