Chapter 10: Auxes and Variable Groups 91
Copying Mains Assignments to Aux Busses
and Variable Group Busses
You can copy the current Main bus assignments to Aux busses
and Variable Group busses, which lets you base monitor
mixes from a main mix. Assignments to the Main Left/ Right
busses can be copied to linked Aux or Variable Group busses,
and assignments to the Center/Mono bus can be copied to
mono Aux or Variable Group busses.
To copy bus assignments from the Mains to Auxes or Variable
Groups:
1 Target the Aux bus or Variable Group bus that you want to
be the destination of the copied assignments by selecting its
on-screen channel strip.
2 Click the Input Assign pop-up menu at the bottom of the
Members list, choose Replace With Mix From, then choose the
available Main bus (Left-Right or Mono) whose assignments
you want to copy to the currently selected bus.
The state of the Aux or Variable Group controls follows the
state of the corresponding controls on the Input Channels as-
signed to the Mains: Channel Mute maps to Bus Send, Chan-
nel Pan maps to Bus Pan, and Channel Fader level maps to Bus
Send level.
To Next Page
Loading...
Need help?
General
