EasyManua.ls Logo

DigiDesign D-Show Profile - Restarting D-Show

DigiDesign D-Show Profile
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 26: Audio Specifications 221
Chapter 26: Audio Specifications
D-Show Profile Console
Internal Sample Frequency 48 kHz
External Sample Frequency 48 kHz +/– 10 ppm (word clock input)
Processing Delay less than 2.8 ms (96 channels, stage input through L–R bus to stage output)
Internal Processing up to 48-bit, fixed point
288 dB internal dynamic range
Frequency Response +/– 0.5 dB (22 Hz – 20 kHz BW, relative to 1 kHz)
THD + N less than 0.01% (Stage Input to L–R bus, input gain @ min, +4 dBu output, 22 Hz – 20 kHz BW
Dynamic Range 108 dB typ
Maximum Voltage Gain 84 dB (Stage Input to L–R bus, channel & L–R faders @ max)
Crosstalk –100 dB typ (Adjacent Stage inputs to L–R bus, @ 1 kHz)
Residual Output Noise –90 dBu typ (22 Hz – 20 kHz BW)
Talkback Mic Input
Connector XLR3-F
Phantom Power +15V @ 6mA (always on)
Sensitivity (fixed) –20 dBu
Input Impedance 20K ohms
Headphone Output
Connector TRS unbalanced
Output Impedance 50 ohms
Max RMS Power Output
at +21 dBu:
(with 32-ohm phones) 20 mW
(with 600-ohm phones) 130 mW

Table of Contents

Related product manuals