Chapter 2: Configuring and Connecting D-Show 21
Enabling a Second Stage Rack
To enable and confirm communication with the second Stage
Rack:
1 Put D-Show in Config mode.
2 Go to the Options page and click the System Config tab.
3 Click Edit.
4 Select Enable Stage 2, and click Apply. D-Show restarts.
5 Go to Options > Devices to view D-Show hardware status.
The connection to the second Stage Rack should be displayed
in the FOH Rack graphic.
Enabling the second Stage Rack
Detail of Devices page showing connection to second Stage Rack
The second Stage Rack must be enabled for the Devices tab
to display the correct number of SRI (Stage Rack Input) and
SRO (Stage Rack Output) cards in that unit.
To Next Page
Loading...
Need help?
General
