DigiDesign D-Show Profile User Manual

D-Show Profile Guide204
Default Settings, Templates and Examples
Default Events
D-Show 2.5 includes the following pre-defined events for you to use as examples and as the starting point for your own events.
Templates
The following table provides a listing of common event definitions. Use the techniques explained throughout this chapter to add
one or more of the following events to establish your own set of events, triggers and actions.
Default events
Event Number Type and Name Triggers Actions
001 Footswitch 1 Switch 1 (Footswitch 1) Closed
undefined (choose an action)
002 Footswitch 2 Switch 2 (Footswitch 2) Closed
undefined (choose an action)
003 Preview Mode (F1) Function Switch 1, Pressed Preview mode, Toggle, Latch
004 (Flash F1) Preview Mode, On Flash Function Switch 1, On, While
Active
005 Variable Groups Mode (F2) Function Switch 2, Pressed Variable Groups Mode, Toggle, Latch
006 (Flash F2) Variable Groups Mode, On
Flash Function Switch 2, On, While
Active
007 Copy Channel (F3) Function Switch 3, Pressed
• Copy Selected Channel
• Light Function Switch 3, On, While
Active
008 Paste to Selected Strip (F4) Function Switch 4, Pressed
• Paste to Selected Channel(s)
• Light Function Switch 4, On, While
Active
Among the default events are the two footswitches; these are Event 001 (for Switch 1, or Footswitch 1), and Event 002 (for Switch
2, or Footswitch 2). If your Show file was created in a previous version of D-Show and included Footswitch 1 and 2 assignments,
those assignments are automatically transferred to the appropriate events. (For more information on Show file compatibility, see
“Events and Show File Compatibility” on page 205.)
Suggested event definitions for common functions
Event Name Trigger Type
Trigger
Properties
Action Type
Action
Properties
Behavior
Talkback (Toggle) Footswitch 1 Closed
Talkback
Toggle Latch
Talkback (Momentary) Footswitch 1 Closed
Talkback
On While Active
Fader Start Fader Above Ch 1 -60 dB
GPI Output 1
Closed Pulse (0.3 s)
Fader Stop Fader Below Ch 1 -inf dB
GPI Output 1
Closed Pulse (0.3 s)
Fader Start/Stop Fader Above Ch 1 -60 dB
GPI Output 1
Closed While Active
Mute Channel (Toggle) Footswitch 1 1 Closed
Mute
Ch 1 Toggle
Mute Channel (Momentary) Footswitch 1 1 Closed
Mute
Ch 1 On While Active

DigiDesign D-Show Profile Specifications

General

Brand	DigiDesign
Model	D-Show Profile
Category	Music Mixer
Language	English