D-Show Profile Guide34
Function Switches
In Function mode, this section provides eight Main Function
switches. The default assignments for the first four Function
switches include Preview mode on/off (F1), Variable Groups
(F2), Copy (F3) and Paste (F4).
Cancel
This switch cancels the current operation, such as Multi-Select
or Multi-Assign modes.
Monitoring
The Monitoring section provides level encoders for the Mon-
itor (near field monitors) and Headphone outputs.
Monitor bus delay can be set on-screen in the Options > Bus-
ses page.
USB Port and System Status LEDs
These LEDs indicate power and system status. These controls
are located in the upper left corner of the control surface.
Meters
The Meter section includes the following:
Bus Output Meters
Eight Bus Output meters provide selectable metering of Out-
put busses.
Main
The Mains meters provide constant level indication of the
house (Mains) output.
Function switches can be assigned to perform any number
of actions using the Events window. For more information,
see Chapter 22, “Events.”
Monitoring controls
Top panel USB port and status LEDs
For more information, see Chapter 28, “Troubleshooting.”
Meters
For more information, see Chapter 13, “Metering.”
Bus Masters Main
To Next Page
Loading...
Need help?
General
