Chapter 21: Snapshots 181
Using Scope Sets
The configuration of the Recall Safe page can be stored as a
Scope Set settings file. Scope Sets can be previewed, recalled
and transferred just like D-Show plug-in, EQ and Dynamics
settings.
To store the current Recall Safe settings as a Scope Set:
1 Configure the Recall Safe page as desired.
2 Click the Scope Sets icon (the folder icon located above and
to the right of the parameter matrix).
3 Click New.
To preview and recall a saved Scope Set:
1 From the Recall Safe page, click the Scope Set icon to display
the Scope Set window.
2 If necessary, choose the appropriate Scope Sets folder by
clicking and selecting it from the Folder selector.
3 Do any of the following:
• To preview an existing Scope Set, click its name in the
Scope Sets window.
• To load the currently selected Scope Set, press Enter or
click the Close box (X) in the Scope Sets window title bar.
• To cancel without changing Recall Safe settings, click
Cancel.
Automation Safing Channels
You can suspend the effect of snapshots on individual chan-
nels using any of the following Automation Safe controls:
Input Channel Safes Temporarily suspend the effect of snap-
shots on individual Input Channels and FX Returns from the
control surface. Function of the Selected Channel Safe switch
is determined by the current setting in the Options > Interac-
tion page for Input Safe Switches.
On-Screen Safe Buttons Each on-screen channel has a safe but-
ton that controls its Channel Safe status.
To toggle the Safe status of an Input Channel or FX Return
directly from the channel strip:
1 Go to the Options page and click the Interaction tab.
2 Under Input Safe Switches, select the “Act as Automation
Safes” option.
3 Press the Safe switch in the Input section, or click the
on-screen Safe button) for each of the Input Channels or FX
Returns you want to safe. The Safe switch lights solid to indi-
cate that the channel is automation safed.
Scope Sets window
See Chapter 20, “Shows and File Management” for instruc-
tions on creating custom folders and transferring D-Show
data.
Scope Sets
Folder selector
On-screen Automation Safe button
You can also control channel automation safe status in the
Recall Safe tab. See “Channel Safe” on page 180.
To Next Page
Loading...
Need help?
General
