D-Show Profile Guide78
Using VCAs
To adjust the levels of VCA members:
1 Press the VCAs switch to assign control of the VCAs to the
Output faders.
2 Move the fader for the VCA whose members you want to ad-
just.
To solo the members of a VCA:
■ Press the Solo switch on the VCA channels whose members
you want to solo so that the Solo switch is lit.
To mute the members of a VCA:
■ Press the Mute switch on the VCA channels whose members
you want to mute. The Mute LEDs on channels contained in
the VCA flash to indicate they are implicitly muted by the
VCA.
To Next Page
Loading...
Need help?
General
