OSD Setup Manual
10
MAC Address 1
This item identifies the first Media Access Control (MAC) address of the DVR.
Software Upgrade
This item is used for updating software of the Versatile/Lite H.264 DVR via local
device. The menu is displayed as follows.
Software Upgrade
Upgrade Version
xxxx-xxxx-xxxx-xxxx
Select
No
Connect an USB storage device containing upgrade software to the DVR; the
available upgrade files will be listed in the menu. To update the system, select a file
and use UP / DOWN keys to choose <Yes>. Press ENTER to confirm the selecti
on and start the upgrade process. The Versatile/Lite H.264 DVR will download
the software, update the system files, and reboot automatically.
The upgrade may take several minutes to save the changes in the memory of the
system. After the DVR is rebooted, please check the software version again.
NOTE: Power interruption is NOT allowed during the software update.
Ensure that no power interruption can occur until the DVR is completely
rebooted.
NOTE: Do not remove the external USB ThumbDrive / DVD+RW before
the DVR has completely shutdown (hard drive and fan are off). Removing
the external USB ThumbDrive / DVD+RW before shutdown can cause the
system to update improperly.
Software Upgrade Via Internet
The item is used to upgrade the unit’s software via the internet. Select one of the
listed software versions and choose <Yes>. The DVR downloads the software,
updates the system files, and reboots automatically.
< Language >
The Language item allows users to select the language for the OSD menu and screen
messages. Language selection takes effect immediately when the selection is made. Press
UP / DOWN to select from listed languages and press ENTER to confirm.
To Next Page
Loading...