Dynamic CCTV EZ960 - Monitor Setup; Show Camera Name; OSD Transparency; VGA Resolution

To Next Page

To Previous Page

OSD Setup Manual

Monitor Setup

The Monitor Setup menu allows users to adjust the quality of the displayed image. Select

<Monitor Setup> from the Main menu and press ENTER. The following menu is displayed.

Monitor Setup

Show Camera Name

OSD Transparency

VGA Resolution

Show Color Bar

Mouse Sensitivity

Hide Status Bar

Status Bar Size

Yes

0 %

1024*768

100%

Medium

< Show Camera Name >

This item allows users to choose whether to display the camera name on the screen or not.

The default is <Yes>, which displays the camera names with the video.

< OSD Transparency >

This item allows users to set the OSD menu transparent in a certain degree, so that users

can see the live images while configuring the OSD settings. The options are <0%>, <15%>,

<30%>, <45%>, <60%>, <75%>, and <90%>.

< VGA Resolution >

This item allows users to select appropriate VGA resolution for the VGA monitor connected

to the DVR. The options are <1024*768>, <1280*1024> and <1080P>.

NOTE: If the selected VGA resolution is too high that the monitor cannot support, the

message “No Signal’’ will be shown on screen. Then please press ESC on the front

panel to restore the original setting.

< Show Color Bar >

Choose this item to display color bar pattern on the screen. The color bar helps to adjust

the monitor hue, saturation, text color, and display options. Press ESC to exit the color bar

pattern display and return to the OSD menu.

< Mouse Sensitivity >

This item allows users to set the sensitivity of the connected mouse. Starting from <10%>,

with 10% increment, the maximum value is <100%>.