Dynamic CCTV EZ960 - By Numerals; Exception no; Exception String; Trigger

OSD Setup Manual
61
 Exception No.
Select an exception number for further settings. Users can select from <1> to
<16>.
 Trigger
Select <On>, those transactions which contain “Exception Strings” and which meet
the “Numerals” conditions will be marked as exceptions in the text database and
will trigger preset actions such as alarm output.
 Exception String
This item allows users to define Exception String. The “Exception String” is
case-sensitive. Only exactly matched ones will be marked as exceptions.
 By Numerals
“Exception String” must be defined before “By Numerals” takes effect. If “By
Numerals” is enabled, only transactions which meet both “Exception String” and
“By Numerals” condition will be marked as exceptions and thus trigger an action.
Users can select from the following options:
OFF:
The function is disabled.
Specific:
The value of transaction meets a specific value will be marked as an exception.
The specific value needs to be set through the following sub-menu <Value>.
Greater Equal Than:
The value of transaction greater than or equal to a certain value will be marked as
an exception. The specific value needs to be set through the following sub-menu
<Value>.
Less Equal Than:
The value of transaction less than or equal to a certain value will be marked as an
exception. The specific value needs to be set through the following sub-menu
<Value>.