Dynamic CCTV EZ960 - SMTP Account; SMTP Password; SMTP Port; Use SSL Connection

OSD Setup Manual
50
- SMTP Port
The item is used to change SMTP port to another port, if necessary.
SMTP usually is implemented to operate over Internet port 25.
To change the SMTP port, move the cursor to <SMTP Port> in SMTP
Setup menu and press ENTER. Use UP / DOWN keys to change the
values in the selected field.
- SMTP Account
The item allows users to setup the SMTP username. Follow these steps
to setup the login username.
 Select <SMTP Account> from SMTP Setup menu and press ENTER.
A virtual keyboard displays.
 Use Direction keys to move the cursor for selecting from characters.
 Press ENTER to add the selected character to the entry field.
 When it’s done, move the cursor to <OK> and press ENTER to save
the settings and exit.
- SMTP Password
The item allows users to setup the SMTP password. Follow these steps
to setup the password.
 Select <SMTP password> from SMTP Setup menu and press ENTER.
A virtual keyboard displays.
 Use Direction keys to move the cursor for selecting from characters.
 Press ENTER to add the selected character to the entry field.
 When it’s done, move the cursor to <OK> and press ENTER to save
the settings and exit.
- Use SSL Connection
SSL stands for Secure Sockets Layer, which provides communications
security over the Internet. Select <On> for this item to enable SSL
connection. Otherwise, select <Off> to disable SSL connection.