OSD Setup Manual
34
Max Rec. PPS
This item will remain constant. In most cases, each channel will be 30PPS for
NTSC and 25PPS for PAL. The only two exceptions are 8CH and 16CH models of
Lite H.264 DVR. Their D1 resolution only supports 15PPS for NTSC and 12.5PPS
for PAL per channel.
CBR/VBR
This item allows users to select an encoding method for the unit.
CBR, standing for Constant Bit Rate, means a way to encode a file at a fixed rate.
That also indicates a CBR file has consistent file size and quality.
VBR, standing for Variable Bit Rate, allocates an appropriate amount of data per
second, depending on the complexity of the video file.
It's strongly suggested to use VBR encoding when reliable video quality is the top
priority.
NOTE: Since a VBR file doesn't have a fixed size, the HDD space usage
cannot be calculated and thus ezRecord function is not supported for VBR
mode. Therefore, if ezRecord is selected as the preset record configuration,
the option of this menu item will automatically be set as <CBR>.
< Schedule Setup >
This submenu is used to set the day and night time, or weekend recording schedule. The
Day and Night schedules are for defining day time and night time; the Weekend schedule
can be modified for weekends and holidays. Select <Schedule Setup> from the Record
Setup menu and press ENTER; the following menu is displayed.
Schedule Setup
Day Time Start
Day Time End
Night Time Start
Night Time End
Weekend Schedule
Weekend Start
Weekend End
AM 06:00
PM 06:00
AM 06:00
PM 06:00
On
Fri PM 06:00
Mon AM 06:00
Day / Night Time Start / End
The Day/Night Start Time and End Time determines the duration of day/night
recording time. Time is indicated in 1-minute increments. The time display format in
this menu is based on the setting of <Time Display Mode> in <System Setup>.
To Next Page
Loading...