OSD Setup Manual
22
- DDNS Password
Users who are using DynDNS as the service provider have to input a
DDNS password. Follow the same step as described in <Host Name>
setup to input the password goes with the valid user name.
- Submit/ Update
When the settings are finished, move the cursor to this item and select
<Yes> to submit the settings.
NOTE: If more than one Versatile/Lite H.264 DVR has the same
domain name, only the first one will be submitted successfully.
- ezDDNS
ezDDNS enables the users to register for host name automatically.
Press ENTER and select <Yes>. The following screen will be displayed:
ezDDNS Submit/update ok!
Host name is XXXX_XXXXXX
Press any key to return
NOTE: The DVR must be connected to the *Real IP address, or
be assigned a specific port using **Port Forwarding technique.
*A "Real IP" is an IP address that is assigned to users by the ISP.
**A "Virtual IP" is an IP address assigned either manually or
through DHCP. When users are assigned a Virtual IP, users must
use Port Forwarding technique to assign a specific port to DVR.
UPnP Setup
UPnP is the abbreviation for Universal Plug and Play, which is a technology that
integrates a universal protocol for widespread plug-and-play devices to ease the
network implementation. When a PC and a DVR both installed the UPnP function,
the PC can automatically recognize the DVR in the same local area network. The
advantage of this function is that PCs can connect to the DVR via the remote
control software by directly clicking on the icon representing the DVR in <My
Network Places> folder. The menu will be as the following.
UPnP Setup
UPnP
To Next Page
Loading...