EDAN F15 Series - 7.8 Monitoring Fetal Movement

F15 Series Fetal & Maternal Monitor User Manual Fetal Monitoring
- 93 -
7.8.2 Enabling or Disabling AFM Monitoring
To enable or disable AFM monitoring,
1 Select the main menu key on the main interface.
2 Select Fetus > AFM.
3 Select ON or OFF (default).
4 Select OK.
7.8.3 Choosing AFM Mode
When AFM monitoring is enabled, the AFM monitoring result is displayed either in the form of a trace
or black marks. The x-axis of each wave or each black mark indicates the duration of a detected fetal
movement.
To choose AFM mode,
1 Select the main menu key on the main interface.
2 Select Fetus > AFM Mode.
3 Select Trace (default) or Black Mark.
4 Select OK.
7.8.4 Choosing FM Source
When AFM monitoring is enabled, the FM has two sources: AFM and MFM.
To choose the FM source,
1 Select the main menu key on the main interface.
2 Select Fetus > FM Source.
3 Select MFM (default) or AFM.
4 Select OK.
7.8.5 Manual Fetal Movement (MFM) Monitoring
MFM result comes from the patient’s feeling of fetal movement. The count will be displayed on the
screen in MFM numeric area.
1) Insert the FM marker connector into the MARK socket on the monitor.
2) Let the patient hold the marker in hand; ask her to press the top key of it when a fetal
movement is felt. Continuous movements in 5 seconds are considered to be one movement
and only press the key once.
7.8.6 Changing MFM Volume
The monitor gives a sound when the FM marker key is pressed, and the volume is adjustable.
To change the MFM volume,
Trace
Black Mark
Traditional 510(k) of Fetal & Maternal Monitor
014_14.1_F15_Series_User_Manual
109／202