F15 Series Fetal & Maternal Monitor User Manual Basic Operation
- 42 -
(ECG): The current HR comes from ECG.
67: Current maternal heart rate measurement numeric.
When F15 Fetal/Maternal Monitor is connected to FTS-3 Fetal Telemetry System, and transducers are
taken up from the base station, the signal strength icon and battery level icon of the US-T
transducers and TOCO-T transducer or TOCO-E transducer are displayed in the numeric window.
When monitoring with wireless model, the measurement numeric fields will display FHR1, FHR2,
FHR3, TOCO, FM (manual or auto) and HR.
When FT20 Telemetry Transmitter is connected to the monitor, besides above parameters, NIBP and
SpO2 will be displayed.
The wireless signal strength icon , and battery level icon of the wireless transducers and
modules are displayed in the numeric window. The wireless signal strength of wireless transducer has
three degrees, 0 is the poorest signal strength (when the signal strength is 0, wireless signal weak
alarm is produced) and 3 is the best signal strength; the battery level of wireless transducer has 5
degrees, 0 is the lowest battery level and 4 is the highest battery level.
3.6.3 Trace Control Tools
Traditional 510(k) of Fetal & Maternal Monitor
014_14.1_F15_Series_User_Manual
To Next Page
Loading...
Need help?
General
