EDAN F15 Series User Manual

F15 Series Fetal & Maternal Monitor User Manual Product Specificaiton
- 139 -
FHR scaling
30bpm/cm (American Standard)
20bpm/cm (International Standard)
TOCO printout width
40mm
TOCO scaling
25%/cm
Printing speed
Standard Speed(Real-Time Traces)
1 cm/min, 2 cm/min, 3 cm/min
Fast Print Speed(Stored Traces)
Up to 15mm/sec
Accuracy of data
± 5% (X axis)
Accuracy of data
± 1% (Y axis)
Resolution
8 dots/mm
Record Information
FHR1/DFHR trace/mark, FHR2 trace/mark, FHR3
trace/mark, TOCO/IUP trace, AFM trace/black mark, fetal
movement mark, event mark (and annotation),
AUTO-zero symbol, alarm indicator, SOV alarm indicator,
US signal weak alarm indicator, transducer wireless
signal weak indicator, date, time, printing speed, ID,
name, FHR2 Offset, FHR3 Offset, HR, SpO
2
, SYS, DIA,
MAP, PR, TEMP, CTG analysis results etc.
A1.5 Rechargeable Lithium-ion Battery
Monitor Battery:
Type
Rechargeable Lithium-ion Battery
Continual Working Time
≥ 2 hours (use new fully charged battery, in environmental
temperature 20~30℃, access fetal transducer, TOCO transducer,
MECG lead wire, blood pressure sleeve, finger blood oxygen
transducer and temperature transducer to simulate monitoring,
and open the real-time print and automatic blood pressure
measurement functions, with paper speed 1cm/min, and automatic
blood pressure measurement interval 15 min.)
Necessary charge time from
"out of power" to "fully
charged"
≤7 hours (stand by or power off status)
Necessary charge time from
"out of power" to "90%
charged"
≤5 hours (stand by or power off status)
Nominal Capacity
5100 mAh(±10%)
Nominal Voltage
10.8V
Cycle Life
≥300 times
Transducer Battery:
Traditional 510(k) of Fetal & Maternal Monitor
014_14.1_F15_Series_User_Manual
155／202

EDAN F15 Series Specifications

General

Brand	EDAN
Model	F15 Series
Category	Monitor
Language	English