EDAN F15 Series User Manual

F15 Series Fetal & Maternal Monitor User Manual Pre-Monitoring Preparation
- 75 -
6.4 Setting Screen Brightness
You can adjust the brightness of the screen,
1 Select the brightness key on the main interface or
2 Select the main menu key on the main interface.
3 Select General>Brightness.
4 Select up/down key to set the brightness level.
5 Select OK.
6.5 Setting Date and Time
You can change the date and time of the monitor,
1 Select the main menu key on the main interface.
2 Select Date And Time.
3 Set the year, month, date, hour, minute and second. The first three numbers are used to set
the year, month and date. Their orders vary with the preset Date Format below.
4 Select Date Format for the format of the date; there are three options: yyyy-mm-dd (default),
mm/dd/yyyy and dd/mm/yyyy.
5 Select OK.
CAUTION
1 You should set date and time information in advance. After this information is changed,
the monitor starts new monitoring with an auto ID. Therefore, we advise you to restart the
monitor after changing date or time information, and do not perform this operation when
monitoring is in process.
2 If date and time cannot be saved, it is probably the battery has reached the end of its
Traditional 510(k) of Fetal & Maternal Monitor
014_14.1_F15_Series_User_Manual
91／202

EDAN F15 Series Specifications

General

Brand	EDAN
Model	F15 Series
Category	Monitor
Language	English