Edwards STP-iXA4507 Series User Manual

STP-iXA4507 series Turbomolecular Pump
MT-91E-001-0
Page 121
STP-LINK AND DISPLAY UNIT
6
6 STP-LINK AND DISPLAY UNIT
The STP-Link (optional accessory) and the display unit iDT-002 (optional accessory) are available
with the STP pump.
6.1 STP-Link
The "STP-Link" is a Windows application for operating the STP pump, confirming the pump status or
setting various settings. Table 32 shows the principal functions.
See the "STP-Link" Instruction Manual for the detailed specification and operating method.
Item
Functions
Operating function
Start, stop, and failure reset operation of STP pump
Confirmation function
Operational state of STP pump
Software version
Serial number
STP pump model
Operation hours
Number of starts
Bearing damage integrated value
Error history
Option setting function
Remote operation mode setting
Serial port setting
Rotational speed setting
TMS setting
*1
Warning function setting
*1 Valid only with TMS function
Table 32 - Functions of STP-Link
6.2 Display unit
The "display unit" operates the STP pump, confirms the pump status or sets various settings. The
display unit iDT-002 is equipped with an LCD and flat panel switches.
See the "Display unit iDT-002" Instruction Manual for the detailed specification and operating
methods.

Edwards STP-iXA4507 Series Specifications

General

Brand	Edwards
Model	STP-iXA4507 Series
Category	Water Pump
Language	English