EasyManuals Logo

ELTEX ESR-3100 User Manual

Default Icon
650 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
ESR series service routers.ESR-Series. User manual
100
1.
2.
3.
4.
5.
6.2 Updating firmware via bootloader
Router firmware may be updated via the bootloader as follows:
When U-Boot finishes the router initialization, break the device startup with the <Esc> key.
Configuring PoE...
distribution 1 dest_threshold 0xa drop_timer 0x0
Configuring POE in bypass mode
NAE configuration done!
initializing port 0, type 2.
initializing port 1, type 2.
SMC Endian Test:b81fb81f
nae-0, nae-1
=======Skip: Load SYS UCORE for old 8xxB1/3xxB0 revision on default.
Hit any key to stop autoboot: 2
Specify TFTP server address:
BRCM.XLP316Lite Rev B0.u-boot# serverip 10.100.100.1
For version 1.5 and newer:
BRCM.XLP316Lite Rev B0.u-boot# serverip 10.100.100.1
Specify router IP address:
BRCM.XLP316Lite Rev B0.u-boot# ipaddr 10.100.100.2
For version 1.5 and newer:
BRCM.XLP316Lite Rev B0.u-boot# ipaddr 10.100.100.2
Specify the name of the firmware file on the TFTP server:
BRCM.XLP316Lite Rev B0.u-boot# firmware_file firmware
For version 1.5 and newer:
BRCM.XLP316Lite Rev B0.u-boot# firmware_file firmware
The environment can be saved using 'saveenv' command for future updates.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX ESR-3100 and is the answer not in the manual?

ELTEX ESR-3100 Specifications

General IconGeneral
BrandELTEX
ModelESR-3100
CategoryNetwork Router
LanguageEnglish

Related product manuals