ELTEX ESR-3100 - Configuration Example

ESR series service routers.ESR-Series. User manual
590
•
•
•
•
Step Description Command Keys
16 Set the current time and date
manually (optional).
esr# set date <TIME>
[<DAY> <MONTH>
[ <YEAR> ] ]
<TIME> – system timer, defined as
HH:MM:SS, where:
HH – hours, takes the value of [0..23];
MM – minutes, takes the value of [0 ..
59];
SS – seconds, takes the value of
[0..59];
<DAY> – day of the month, takes
values of [1..31];
<MONTH> – month, takes the following
values [January/February/March/April/May/
June/July/August/September/October/
November/December];
<YEAR> – year, takes values of [2001..2037].
16.6.2 Configuration example
Objective:
Set the time synchronization from the NTP server.
ESR router IP address – 192.168.52.8,
NTPserver IP address –192.168.52.41.