ELTEX ESR-3100 - Syslog Configuration; Configuration Algorithm

ESR series service routers.ESR-Series. User manual
608
Example of the snmpget command execution:
17.5 Syslog configuration
Syslog (System Log) – standard for sending and registering messages about events occurring in the system is
used in networks operating over IP.
17.5.1 Configuration algorithm
Step Description Command Keys
1 Enable sending syslog messages as a
snmp-trap to snmp server.
esr(config)# syslog
snmp
2 Enable or disable sending events of
individual router processes operation
to the snmp server (optional).
esr(config-syslog-
snmp)# match [not]
process-name
<PROCESS-NAME>
<PROCESS-NAME> – see 'CLI command
reference guide'.
If allowing criteria are specified (match
process-name), only messages of the
specified processes are logged.
If prohibiting criteria are specified (match
not process-name), messages of all not
prohibited processes are logged.
By default, logging of messages from all
processes is allowed.