ELTEX ESR-3100 - Installation and Connection; Support Brackets Mounting

ESR series service routers.ESR-Series. User manual
82
•
•
•
•
•
•
•
1.
2.
3.
3 Installation and connection
Support brackets mounting
Device rack installation
ESR-1000, ESR-1200, ESR-1500, ESR-1511, ESR-1700, ESR-3100,ESR-3200 power module installation
Connection to Power Supply
SFP transceiver installation and removal
Transceiver installation
Transceiver removal
This section describes installation of the device into a rack and connection to a power supply.
3.1 Support brackets mounting
The delivery package includes support brackets for rack installation and mounting screws to fix the device
case on the brackets. To install the support brackets:
Figure 60 – Support brackets mounting
Align four mounting holes in the support bracket with the corresponding holes in the side panel of the
device.
Use a screwdriver to screw the support bracket to the case.
Repeat steps 1 and 2 for the second support bracket.