ELTEX ESR-3100 - Configuration Example

ESR series service routers.ESR-Series. User manual
542
•
•
•
•
•
15.1.2 Configuration example
Objective:
Configure PPTP server on a router.
PPTP server address: 120.11.5.1;
Gateway inside the tunnel for connecting clients: 10.10.10.1;
IP address pool for lease: 10.10.10.5-10.10.10.25;
DNS servers: 8.8.8.8, 8.8.8.4;
Accounts for connection: Fedor, Ivan.
Solution:
Create an address profile that contains an address to be listened by the server:
esr# configure
esr(config)# object-group network pptp_outside
esr(config-object-group-network)# ip address-range 120.11.5.1
esr(config-object-group-network)# exit
Create address profile that contains local gateway address:
esr(config)# object-group network pptp_local
esr(config-object-group-network)# ip address-range 10.10.10.1
esr(config-object-group-network)# exit
Create address profile that contains client addresses:
esr(config)# object-group network pptp_remote
esr(config-object-group-network)# ip address-range 10.10.10.5-10.10.10.25
esr(config-object-group-network)# exit