ELTEX ESR-3100 User Manual

ESR series service routers.ESR-Series. User manual
604
Step Description Command Keys
8 Specify the processing time for remote
commands (optional).
esr(config-zabbix)# timeout
<TIME>
esr(config-zabbix-proxy)#
timeout <TIME>
<TIME> – timeout, takes value in
seconds [1..30].
Default value: 3. It is
recommended to set the
maximum value since some
commands may take longer than
the default.
If the command is not completed
within the specified time,
processing of the command will
be terminated.
9 Enable agent/proxy functionality. esr(config-zabbix)# enable
esr(config-zabbix-proxy)#
enable
10 Allow access to the router (to the self zone) on TCP ports 10050, 10051 from the appropriate firewall security
zone. SeeFirewall configuration
17.4.2 Zabbix-agent configuration example
Objective:
Configure the interaction between the agent and the server to execute remote commands from the server.
Solution:
In the context of the agent settings, specify the address of the Zabbix server, and the address from which the
server will interact:
esr(config-zabbix)# server 192.168.32.101
esr(config-zabbix)# source-address 192.168.39.170
To activate the active mode, specify hostname, active-server, and also enable the execution of remote
commands:
esr(config-zabbix)# hostname ESR-agent
esr(config-zabbix)# active-server 192.168.32.101
esr(config-zabbix)# remote-commands

ELTEX ESR-3100 Specifications

General

Brand	ELTEX
Model	ESR-3100
Category	Network Router
Language	English