ELTEX ESR-3100 - 2.4.6 ESR-200, ESR-100 design

ESR series service routers.ESR-Series. User manual
50
Table 20 – Rear panel connectors description
№ Description
1 Main power supply.
2 Place for installation of a redundant power supply.
3 Hot-swappable removable ventilation modules.
4 Earth bonding point of the device.
ESR-1200, ESR-1000 side panels
The side panel layout of ESR-1200, ESR-1000 is depicted in Figures 21 and 22.
Figure 21 – ESR-1200, 1000 right side panel
Figure 22 – ESR-1200, 1000 left side panel
Side panels of the device have air vents for heat removal. Do not block air vents. This may cause the
components to overheat, which may result in device malfunction. For recommendations on device installation,
see section Installation and connection.
2.4.6 ESR-200, ESR-100 design
ESR-100, ESR-200 front panel
The front panel layout of ESR-200 is depicted in figure 23.
Figure 23 – ESR-200 front panel
The front panel layout of ESR-100 is depicted in figure 24.