ELTEX ESR-3100 - Local Authentication Configuration Algorithm

ESR series service routers.ESR-Series. User manual
440
•
•
•
•
•
•
•
•
•
•
13.1.1 Local authentication configuration algorithm
Step Description Command Keys
1 Set local as authentication
method.
esr(config)# aaa authentication
login { default | <NAME> }
<METHOD 1>
[ <METHOD 2> ] [ <METHOD 3> ]
[ <METHOD 4> ]
<NAME> – list name, set by the
string of up to 31 characters.
Authentication methods:
local – authentication by
local user base;
tacacs – authentication by
TACACS server list;
radius – authentication by
RADIUS server list;
ldap – authentication by
LDAP server list.
2 Set enable as authentication
method of user privileges
elevation.
esr(config)# aaa authentication
enable <NAME><METHOD 1>
[ <METHOD 2> ]
[ <METHOD 3> ] [ <METHOD 4> ]
<NAME> – list name, set by the
string of up to 31 characters.
Authentication methods:
local – authentication by
local user base;
tacacs – authentication by
TACACS server list;
radius – authentication by
RADIUS server list;
ldap – authentication by
LDAP server list.
3 Set the method for iterating over
authentication methods
(optional).
esr(config)# aaa authentication
mode <MODE>
<MODE> – options of iterating over
methods:
chain – if the server returned
FAIL, proceed to the
following authentication
method in the chain;
break – if the server returned
FAIL, abandon authentication
attempts. If the server is
unavailable, continue
authentication attempts by
the following methods in the
chain.
Default value: chain.