ELTEX ESR-3100 - 18 BRAS (Broadband Remote Access Server) management; 18.1 Configuration algorithm

ESR series service routers.ESR-Series. User manual
616
•
•
•
18 BRAS (Broadband Remote Access Server) management
Configuration algorithm
Example of configuration with SoftWLC
Example of configuration without SoftWLC
18.1 Configuration algorithm
Step Description Command Keys
1 Add RADIUS server to the list of used
servers and switch to its
configuration mode.
esr(config)# radius-server
host
{ <IP-ADDR> | <IPV6-ADDR> }
[ vrf <VRF> ]
esr(config-radius-server)#
<IP-ADDR> – RADIUS server IP
address, defined as
AAA.BBB.CCC.DDD where each part
takes values of [0..255];
<IPV6-ADDR> – RADIUS server IPv6
address, defined as X:X:X:X::X where
each part takes values in
hexadecimal format [0..FFFF];
<VRF> – VRF instance name, set by
the string of up to 31 characters.
2 Set the password for authentication
on remote RADIUS server.
esr(config-radius-server)# key
ascii-text
{ <TEXT> | encrypted
<ENCRYPTED-TEXT> }
<TEXT> – string of [8..16] ASCII
characters; <ENCRYPTED-TEXT> –
encrypted password, [8..16] bytes
size, set by the string of [16..32]
characters.
3 Create AAA profile. esr(config)# aaa radius-profile
<NAME>
<NAME> – server profile name, set by
the string of up to 31 characters.
4 Specify RADIUS server in AAA
profile.
esr(config-aaa-radius-
profile)# radius-server host
{ <IP-ADDR> | <IPV6-ADDR> }
<IP-ADDR> – RADIUS server IP
address, defined as
AAA.BBB.CCC.DDD where each part
takes values of [0..255];
<IPV6-ADDR> – RADIUS server IPv6
address, defined as X:X:X:X::X where
each part takes values in
hexadecimal format [0..FFFF].
5 Create DAS server. esr(config)# das-server
<NAME>
<NAME> – DAS server name, set by
the string of up to 31 characters.
6 Set the password for authentication
on remote DAS server.
esr(config-das-server)# key
ascii-text
{<TEXT>|encrypted
<ENCRYPTED-TEXT> }
<TEXT> – string of [8..16] ASCII
characters; <ENCRYPTED-TEXT> –
encrypted password, [8..16] bytes
size, set by the string of [16..32]
characters.