ELTEX ESR-3100 - Page 287

ESR series service routers.ESR-Series. User manual
287
Step Description Command Keys
esr(config-route-map-
rule)# match ipv6 address
object-group <OBJ-
GROUP-NETWORK-NAME>
8 Set IP addresses profile that
includes BGPNext-Hop attribute
value in the route for which the
rule should work (optional).
esr(config-route-map-
rule)# match ip next-hop
object-group <OBJ-
GROUP-NETWORK-NAME>
<OBJ-GROUP-NETWORK-NAME> – name of
the IP addresses profile that includes
destination subnets prefixes, set by the
string of up to 31 characters.
esr(config-route-map-
rule)# match ipv6 next-
hop object-group <OBJ-
GROUP-NETWORK-NAME>
9 Set the profile that includes IP
addresses of the router having
advertised the route for which the
rule should work (optional).
esr(config-route-map-
rule)# match ip route-
source object-group
<OBJ-GROUP-NETWORK-
NAME>
<OBJ-GROUP-NETWORK-NAME> – name of
the IP addresses profile that includes
destination subnets prefixes, set by the
string of up to 31 characters.
esr(config-route-map-
rule)# match ipv6 route-
source object-group
<OBJ-GROUP-NETWORK-
NAME>
10 Specify ACL group for which the
rule should work (optional).
esr(config-route-map-
rule)# match access-group
<NAME>
<NAME> – access control list name, set by
the string of up to 31 characters.
11 Set BGP MED attribute value in the
route for which the rule should
work (optional).
esr(config-route-map-
rule)# match metric bgp
<METRIC>
<METRIC> – BGP MED attribute value, takes
values in the range of [0..4294967295].
12 Set OSPF Metric attribute value in
the route for which the rule should
work.
esr(config-route-map-
rule)# match metric ospf
<TYPE> <METRIC>
<TYPE> – OSPF Metric attribute type, takes
values type-1 and type-2;
<METRIC> – OSPF Metric attribute value,
takes values in the range of [0..65535].
13 Set RIP Metric attribute value in
the route for which the rule should
work.
esr(config-route-map-
rule)# match metric rip
<METRIC>
<METRIC> – RIP Metric attribute value,
takes values in the range of [0..16].
14 Set OSPF Tag attribute value in
the route for which the rule should
work.
esr(config-route-map-
rule)# match tag ospf
<TAG>
<TAG> – OSPF Tag attribute value, takes
values in the range of [0..4294967295].