ELTEX ESR-3100 User Manual

ESR series service routers.ESR-Series. User manual
540
•
•
Step Description Command Keys
3 Specify IP address that should be
proceeded by PPTP server.
esr(config-pptp-server)# outside-
address
{ object-group <OBJ-GROUP-
NETWORK-NAME> |
ip-address <ADDR> | interface
{ <IF> | <TUN> } }
<OBJ-GROUP-NETWORK-NAME> –
name of the profile having IP
address that should listened by
PPTP server, set by the string of
up to 31 characters;
<ADDR> – range starting IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255];
<IF> – router interface type and
identifier;
<TUN> – router tunnel type and
number.
4 IP address of a local gateway. esr(config-pptp-server)# local-
address
{ object-group <OBJ-GROUP-
NETWORK-NAME> |
ip-address <ADDR> }
<OBJ-GROUP-NETWORK-NAME> –
name of the IP addresses profile
that includes local gateway IP
address, set by the string of up to
31 characters;
<ADDR> – range starting IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255].
5 Specify IP addresses list from which
dynamic IP addresses are leased to
remote users by PPTP.
esr(config-pptp-server)# remote-
address
{ object-group <OBJ-GROUP-
NETWORK-NAME> |
address-range <FROM-ADDR>-
<TO-ADDR> }
<OBJ-GROUP-NETWORK-NAME> –
name of the IP addresses profile
that includes remote users IP
addresses list, set by the string of
up to 31 characters;
<FROM-ADDR> – range starting IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255];
<TO-ADDR> – range ending IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255].
6 Select PPTP clients authentication
mode.
esr(config-pptp-server)#
authentication mode
{ local | radius }
local – user authentication
by local base.
radius – user
authentication by RADIUS
server base. The router
must be configured to
interact with a RADIUS-
server, see section AAA
RADIUS configuration
algorithm.

ELTEX ESR-3100 Specifications

General

Brand	ELTEX
Model	ESR-3100
Category	Network Router
Language	English