ELTEX ESR-3100 - Page 546

ESR series service routers.ESR-Series. User manual
546
Step Description Command Keys
10 Specify user password (when using
local authentication base).
esr(config-l2tp-user)
password ascii-text
{ <PASSWORD> | encrypted
<PASSWORD> }
<PASSWORD> – user password, set
by the string of up to 32 characters.
11 Enable user (when using local
authentication base).
esr(config-l2tp-user) enable
12 Select a key authentication method
for IKE connection (optional).
esr(config-l2tp-server)#
ipsec authentication method
pre-shared-key
13 Specify a shared secret
authentication key that should be the
same for both parties of the tunnel.
esr(config-l2tp-server)#
ipsec authentication pre-
shared-key
{ ascii-text { <TEXT> |
encrypted <ENCRYPTED-
TEXT> } |
hexadecimal {<HEX> |
encrypted <ENCRYPTED-
HEX> } }
<TEXT> – string [1..64] ASCII
characters;
<HEX> – number, [1..32] bytes size,
set by the string of [2..128]
characters in hexadecimal format
(0xYYYY ...) or (YYYY ...).
<ENCRYPTED-TEXT> – encrypted
password, [1..32] bytes size, set by
the string of [2..128] characters.
<ENCRYPTED-TEXT> – encrypted
number, [2..64] bytes size, set by the
string of [2..256] characters.
14 Restrict the authentication and
encryption methods used for the IKE
protocol (optional).
esr(config-l2tp-server)#
ipsec ike proposal <NAME>
<NAME> – name of the previously
created IKE profile, set by the string
of up to 31 characters.
15 Restrict the authentication and
encryption methods used for the
IPsec protocol (optional).
esr(config-l2tp-server)#
ipsec proposal <NAME>
<NAME> – name of the previously
created IPsec profile, set by the string
of up to 31 characters.
16 Enable server. esr(config-l2tp-server)#
enable
17 Specify outgoing packets DSCP
priority.
esr(config-l2tp-server)# dscp
<DSCP>
<DSCP> – outgoing packets dscp
priority [0..63].
18 Specify MTU size
(MaximumTransmissionUnit) for the
server (optional).
MTU above 1500 will be active only
when using the 'system jumbo-
frames' command.
esr(config-l2tp-server) mtu
<MTU>
<MTU> – MTU value, takes values in
the range of [1280..1500].
Default value: 1500.