ELTEX ESR-3100 User Manual

ESR series service routers.ESR-Series. User manual
619
Step Description Command Keys
26 Enable transparent transmission of
backup traffic for BRAS (optional).
esr(config-subscriber-
control)# backup traffic-
processing
transparent
27 Specify the interval after which
currently unused URL lists will be
removed (optional).
esr(config)# subscriber-
control unused-filters-
remove-delay
<DELAY>
<DELAY> – time interval in seconds,
takes values of [10800..86400].
28 Specify the interval after which, if a
user has not sent any packets, the
session is considered to be outdated
and is removed from the device
(optional).
esr(config-subscriber-default-
service)# session-timeout
<SEC>
<SEC> – time interval in seconds,
takes values of [120..3600].
29 Specify the VRRP group on the basis
of which user control service status
is determined (primary/redundant)
(optional).
esr(config-subscriber-
control)# vrrp-group <GRID>
<GRID> – VRRP router group
identifier, takes values in the range of
[1..32].
30 Define destination TCP ports from
which the traffic will be redirected to
the router HTTP Proxy server
(optional).
esr(config-subscriber-
control)# ip proxy http listen-
ports <NAME>
<NAME> – TCP/UDP ports profile
name, set by the string of up to 31
characters.
31 Define HTTP Proxy server port on
the router (optional).
esr(config-subscriber-
control)# ip proxy http
redirect-port <PORT>
<PORT> – port number, set in the
range of [1..65535].
32 Define destination TCP ports from
which the traffic will be redirected to
the router HTTPS Proxy server
(optional).
esr(config-subscriber-
control)# ip proxy https listen-
ports <NAME>
<NAME> – TCP/UDP ports profile
name, set by the string of up to 31
characters.
33 Define HTTPS Proxy server port on
the router (optional).
esr(config-subscriber-
control)# ip proxy https
redirect-port <PORT>
<PORT> – port number, set in the
range of [1..65535].
34 Set router IP address that will be
used as source IP address in HTTP/
HTTPS packets transmitted by Proxy
server (optional).
esr(config-subscriber-
control)# ip proxy source-
address <ADDR>
<ADDR> – source IP address, defined
as AAA.BBB.CCC.DDD where each
part takes values of [0..255].
35 Specify URL address of the server
providing lists of traffic filtration
applications (optional).
esr(config)# subscriber-
control apps-server-url <URL>
<URL> – reference address, set by the
string from 8 to 255 characters.

ELTEX ESR-3100 Specifications

General

Brand	ELTEX
Model	ESR-3100
Category	Network Router
Language	English