EOS P 396 - Page 10

0
Contents
0.6
Training manual • Basic training • Status 03.14
EOS P 396
Providing refreshed powder to the machine ......................................................... 7.22
Cleaning parts............................................................................................................................. 7.23
8 Process monitoring
Overview..........................................................................................................................................8.1
Checking, determining, setting building temperature .......................................................8.1
Determining shrinkage and beam offset................................................................................8.2
Determining, adjusting material-dependent shrinkage...............................................8.2
Determining, adjusting material-dependent beam offset ..........................................8.4
Documenting machine data and building process..............................................................8.5
Backing up machine configuration ...................................................................................8.5
Documenting building process using the PSW ..............................................................8.6
Documenting building process using EOSTATE..............................................................8.7
Exporting job data ...........................................................................................................8.7
Recording building temperature..................................................................................8.7
Displaying, preparing results, reports, statistics......................................................8.8
Backing up, archiving database ................................................................................ 8.10
9 Troubleshooting and maintenance
Troubleshooting.............................................................................................................................9.1
Machine.....................................................................................................................................9.1
Scoring in the surface of the powder.........................................................................9.2
Curling of exposed surfaces ..........................................................................................9.5
Cracks in the surface of the powder...........................................................................9.6
Parts torn out ....................................................................................................................9.9
Recoater level not optimal ......................................................................................... 9.12
Building with soiled plastic powder......................................................................... 9.14
Accessories and Options .................................................................................................... 9.14
IPCM EOSINT P 3 .................................................................................................................9.14
IPCM P plus ........................................................................................................................... 9.14
Maintenance ............................................................................................................................... 9.15
Machine.................................................................................................................................. 9.15
Cleaning the laser window......................................................................................... 9.15