EOS P 396 User Manual

Part Property Management
5.7
Training manual • Basic training • Status 03.14
EOS P 396
5
Balance
The PPP parameter set Balance is built with a layer thickness of 0.12 mm. With its
balanced relationship between manufacturing costs, mechanical properties, surface
quality and accuracy this is the standard parameter set from EOS. It is suitable for
the widest range of geometries, part sizes and requirements.
Example part PPP Balance
Performance
The PPP parameter set Performance is built with a layer thickness of 0.10 mm. Its
outstanding feature is its isotropic strength and stiffness in all three spatial
directions. The fine resolution in this layer thickness ensures very high detail
resolution and surface quality at the same time. It is suitable for medium to small
parts with high quality requirements.
Example part PPP Performance

EOS P 396 Specifications

General

Brand	EOS
Model	P 396
Category	3D Printers
Language	English