EOS P 396 User Manual

6
Data preparation
6.24
Training manual • Basic training • Status 03.14
EOS P 396
2. Select STL file(s) and click using the right mouse button.
The Windows context menu contains, in addition to the normal options for the
computer configuration, specific options for EOS RP-Tools.
3. Click slice parameter set.
The files are sliced and repaired once.
The data are automatically saved as SLI files.
In case of an erroneous file, an error list with the layers in which repairs have
been made appears, as well as the layers that still contain errors.
Minor remaining part errors can be corrected.
☞ Correcting part data using SLIFIX.
Correcting part data using SLIFIX
Data errors are detected by slicing and automatically corrected.
In addition, specific minor corrections can be made to individual layers, lines or gaps.
Data errors smaller than 1 mm² can be corrected using SLIFIX.
1. In Windows Explorer use the right mouse button to click the SLI file for the part.
2. Click the SLIFIX button to start the automatic correction of the part.
In case of a file with errors, an error list appears.
A Slice parameter sets PPP B Slice parameter sets OEP
Risk of process problems!
If unchecked and uncorrected
SLI files are processed using the PSW , process
malfunctions such as exposure errors or process cancellation can occur.

EOS P 396 Specifications

General

Brand	EOS
Model	P 396
Category	3D Printers
Language	English