Layout, function of machine and accessories
3.12
Training manual • Basic training • Status 03.14
EOS P 396
3
Unpacking stand
Layout
Function
Parts can be unpacked from the machine's exchangeable frame using the Unpacking
stand.
The exchangeable frame is fastened to the Lifting truck and positioned over the
ejection ram and lowered. The building platform sits on the ejection ram. In this way
the parts are pressed out of the exchangeable frame. Loose plastic powder and parts
are collected in a tray that sits on the exchangeable frame. Two spiral hoses on the
tray each feed the plastic powder to a used powder bin.
A Unpacking stand
B Lifting truck
1Tray
2 Used powder bin
3 Connection for Vacuum cleaner
4 Ejection ram
5Base plate
6 Spiral hose
7 Exchangeable frame with building
platform
8 Grid with guide rod
To Next Page
Loading...
Need help?
General