Operation of machine & accessories
7.7
Training manual • Basic training • Status 03.14
EOS P 396
7
Making material-specific settings
The materials behave differently during the processing in the machine such that
different powder-specific exposure parameters, recoating parameters and heating
parameters are necessary.
These settings are saved in default jobs that can also be modified.
The exposure and recoating parameters in the default job loaded are loaded
automatically when the PSW is started and apply for every new job.
Loading EOS default job
The default parameters for the processing of the materials are saved in the EOS
default jobs. It is important that the default job that matches the material has been
loaded.
☞ Operation EOS P 396 manual, section 6, EOS Loading default job.
Preparing user-defined default job
In addition to the EOS default jobs, it is also possible to create user-defined default
jobs.
☞ Operation EOS P 396 manual, section 6, Preparing user-defined default job.
Loading user-defined default job
Instead of an EOS default job, a user-defined job can also be loaded.
☞ Operation EOS P 396 manual, section 6, Loading user-defined default job.
To Next Page
Loading...