EOS P 396 - Build Processor Option: Selecting and Setting up Printer

Data preparation
6.5
Training manual • Basic training • Status 03.14
EOS P 396
6
Build Processor option: selecting and setting up printer
To ensure the correct data for the transformation of the 3D data into layer data are
available in Magics, the machine type must be setup as a printer.
1. In Windows Control Panel select Build Processor Manager.
The 3D Printers window is displayed.
2. In the 3D Printers window, click the Add a 3D Printer button.
3. Select machine type to be installed and continue using Add.