3
Layout, function of machine and accessories
3.16
Training manual • Basic training • Status 03.14
EOS P 396
Unpacking and sieving station P 3
Layout
Function
The Unpacking and sieving station P 3 comprises an unpacking module and a sieving
element. A cover prevents the production of dust on unpacking the parts.
In the unpacking element the sintered parts can be removed from the exchangeable
frame for the P 3. Used powder produced during this process is passed to the sieving
element where it is sieved via the used powder hopper. The recycled powder
produced can then be refreshed and used for a new building process.
1 Hand lever for building platform carrier
2 Covering hood
3 Sieving machine
4 Recycled powder bin
5 Machine's exchangeable frame
To Next Page
Loading...
Need help?
General