EOS P 396 User Manual

Part Property Management
5.5
Training manual • Basic training • Status 03.14
EOS P 396
5
PPP parameter sets
For the production of parts with different requirement profiles, special parameter
sets with qualified material and process properties are available; these sets are
termed PPP parameter sets. Independent of which PPP parameter set was used and
on which machine a part was manufactured, the same part properties are ensured.
This quality is described by the Part Property Profile (PPP).
TopSpeed
The PPP parameter set Top Speed is built with a layer thickness of 0.18 mm. It is
suitable for the manufacture of parts with medium to high quality requirements with
high pressure on costs. Particularly large and thick-walled parts can profit here from
the high building rates. This PPP parameter set is also excellently suited to parts
critical for distortion and provides high part accuracies on large parts.
Example part PPP TopSpeed

EOS P 396 Specifications

General

Brand	EOS
Model	P 396
Category	3D Printers
Language	English