EOS P 396 - Adding a Scene

Data preparation
6.3
Training manual • Basic training • Status 03.14
EOS P 396
6
Adding a scene
1. Start the Magics RP software application.
2. On the Scenes menu select the Machine library... option.
The Add Machines from Library window appears.
3. In the Add machine from the Magics Library window select the required unit of
measure, e. g. mm-settings.
4. By double-clicking the EOS folder, open the EOS machine library in which all EOS
machines are listed.
When you open Magics RP for the first time or want to work with a new
machine, you must first setup the scene (machine platform).
If you have already added the scene, go to section Loading a machine.