7
Operation of machine & accessories
7.24
Training manual • Basic training • Status 03.14
EOS P 396
3. If necessary, wash off parts using warm water (max. 60 - 80 °C).
EOS recommends washing off the parts with warm water. In this way parts are
freed of excess adhering powder.
It is also possible to clean the parts in a dishwasher (max. 60 - 80 °C).
You will find further information on cleaning the parts in the Accessories and
Options EOS P 396 manual, section 8, Shot-peening cabinet.
To Next Page
Loading...