Epson AcuLaser C1100 - Page 247

EPSON AcuLaser C1100 Revision B
TROUBLESHOOTING Printing Quality-related Trouble 247
12
Check of image primary transfer process
Is the toner image on the drum transferred
normally to IBT BELT?
Execute a test print, turn the power OFF when
you think that the primary transfer process is
in progress during printing, and check the
toner image on IBT BELT.
Go to Step [13]. Replace LV/
HVPS. (p.407)
13
Check of image secondary transfer process
Is the toner image on IBT BELT transferred
normally to the paper?
Execute a test print, turn the power OFF when
you think that the image transfer process is in
progress during printing, and check the paper.
Go to Step [14]. Replace LV/
HVPS. (p.407)
14
Check after replacement of ESS
Replace ESS.
Make a test print of the problem image.
Is the image printed normally?
End of
procedure
Replace “ESS
and possible
parts that
caused the
error”.
Step Check Yes No