Epson Stylus COLOR 3000 Service Manual

Adjustment
EPSON Stylus Color 3000 Service Manual
4-4
Market Setting Input
This operation writes the market codes into the EEPROM on the main control board. This operation writes all
factory values simultaneously.
1. Connect the printer to the host computer with a parallel interface cable.
2. Start the adjustment program. The program requires GWBASIC.
3. The market setting menu appears. Move the cursor using ↑ or ↓ to select the correct marketing code
from the list and press Enter. An example (for EAI) is shown below:
Notes:
1. Unless the market setting is entered, the program does not proceed to the main menu.
2. Input of an incorrect market code will cause a program failure.
4. The main menu appears on the monitor.
 Select Adjustment and Check. Press Enter to proceed to the Adjustment and Check menu.
 Select END and press Enter to exit the program.
REMINDER
 Make all adjustment program selections with the arrow keys (
↑
and
↓
).
 Adjusted values are not stored in the EEPROM until the printer is turned off. Therefore, turn off the
printer after using the adjustment program.
 The set values are transferred to the printer when each adjustment menu is closed. Do not turn off the
printer before exiting the menus you have made adjustments in.
<< Market Setting>>
Now :
1. C203001 (JPN)
2.
C203011 (EAI)
¦ ¦
¦ ¦
H. C203161 (RUSSIA)
Select
<<<Main>>>
1. Market (001)
2. Adjustment & Check
3. Sensor Check
E. End
Select
< 3. Sensor Check >
1. CR-PWS
2. ASF Quantity
3. ASF-Width
4. ASF Length
5. PG
R. Return

Epson Stylus COLOR 3000 Specifications

Printing Resolution

maximum resolution	1440 x 720 dpi
driver setting resolution	720 x 720 dpi
printable width	410 mm

Paper Handling

paper capacity (plain paper)	100 sheets
paper capacity (EPSON Inkjet transparencies)	30 sheets
paper capacity (envelopes)	10 envelopes

Ink Cartridges

black ink cartridge print capacity	Up to 3, 000 pages (A4, text @ 360dpi)
colour ink cartridges print capacity	Up to 2, 100 pages (A4, 360dpi 5% duty each colour)
colour ink cartridges	Cyan, Magenta, Yellow

Operating Environment

operating temperature	10-35°C
operating humidity	20-80% RH
total print volume	75, 000 pages (A3, text only)

Electrical Specifications

rated voltage	AC 220V-240V
rated frequency	50-60 Hz
power consumption	Approx. 21W (ISO 10561 letter pattern)

Weight and Dimensions

weight	18 Kg
width	810 mm
depth	565 mm
height	240 mm