Epson Stylus COLOR 3000 Service Manual

EPSON Stylus COLOR 3000
EPSON Stylus Color 3000 Service Manual
5
-11
5.4 Component Repair of the C203 Main Board
This section provides information that enables you to repair and replace defective components on the C203
main board. Tables 5-6 lists the causes for each symptom in order of possibility.
Table 5-6. Component Repair of the C203 Main Board
Condition Cause Checkpoint Solution
Symptom: The printer does not operate at all.
Reset circuit is
defective.
Check the following signals for the
waveforms:
IC9:/RESET (Pin 1), V line (Pin
3)
IC3:OUT (Pin 6), 42 V line (Pin
2)
+5V
RE
SE
T
Waveform 6
Replace the main
board or the reset IC.
Selection of ROM
and sub gate array
is improper.
Check the waveform for one of the
following signals output from the
CPU (IC5) for a change in HIGH
and LOW:
/CS0 (Pin 1), /CS1 (Pin 2),
/CS2 (Pin128), /CS3 (Pin 127)
Waveform 7
Replace the main
board.
The CPU doesn’t
operate. (The driver
mechanism doesn’t
operate properly
at power on/off.)
CG-ROM or PROM is defective. Replace the main
board or PROM.

Epson Stylus COLOR 3000 Specifications

Printing Resolution

maximum resolution	1440 x 720 dpi
driver setting resolution	720 x 720 dpi
printable width	410 mm

Paper Handling

paper capacity (plain paper)	100 sheets
paper capacity (EPSON Inkjet transparencies)	30 sheets
paper capacity (envelopes)	10 envelopes

Ink Cartridges

black ink cartridge print capacity	Up to 3, 000 pages (A4, text @ 360dpi)
colour ink cartridges print capacity	Up to 2, 100 pages (A4, 360dpi 5% duty each colour)
colour ink cartridges	Cyan, Magenta, Yellow

Operating Environment

operating temperature	10-35°C
operating humidity	20-80% RH
total print volume	75, 000 pages (A3, text only)

Electrical Specifications

rated voltage	AC 220V-240V
rated frequency	50-60 Hz
power consumption	Approx. 21W (ISO 10561 letter pattern)

Weight and Dimensions

weight	18 Kg
width	810 mm
depth	565 mm
height	240 mm