Epson Stylus COLOR 3000

Product Description
EPSON Stylus Color 3000 Service Manual
1-14
Electric Specifications
120 V version
 Rated voltage 120 VAC
 Input voltage range 103.5 to 132 VAC
 Rated frequency range 50 to 60 Hz
 Input frequency range 49.5 to 60.5 Hz
 Rated current 0.7 A (maximum)
 Power consumption Approximately 21 W (ISO/IEC 10561 Letter pattern)
Energy Star compliant
 Insulation resistance 10 M ohms min. (Between AC line and chassis, 500 VDC)
 Dielectric strength 1,000 VAC rms. for 1 minute or
1,200 VAC rms. for 1 second (Between AC line and chassis)
220 - 240V version
 Rated voltage 220 to 240 VAC
 Input voltage range 198 to 264 VAC
 Rated frequency range 50 to 60 Hz
 Input frequency range 49.5 to 60.5 Hz
 Rated current 0.4 A (maximum)
 Power consumption Approximately 21 W (ISO/IEC 10561 Letter pattern)
Energy Star program compliant
 Insulation resistance 10 M ohms min. (Between AC line and chassis, DC 500 V)
 Dielectric strength AC 1,500 Vrms. for 1 minute (Between AC line and chassis)
Environmental Conditions
Temperature
 Operating* 50 to 95 °F (10 to 35°C)
 Non operating
†
-4 to 140 °F (-20 to 60°C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Humidity
 Operating* 20% to 80% RH (without condensation)
 Non operating
†
5% to 85% RH (without condensation)
Resistance to vibration
 Operating* 0.15 G
 Non-operating
†
0.50 G
Resistance to shock
 Operating* 1 G within 1 ms
 Non-operating
†
2 G within 2 ms
* Refer to the table on the next page for the guaranteed range of operation.
† In shipment container.