405.1200.037.2 - Rel.: 2.21 of 25/02/2008
13-19
Press F3=MemoCARD (if the key is not on screen, see Page 13-14); the
following mask will appear:
For the meaning and function of the keys see
“Chapter 34 -> Memory card“.
VT330W TRANSFER PAGE
Graphic controller BOOT check : OK
Graphic controller RAM check : OK
Main BOOT and RAM check : OK
Graphic controller synchronization : OK
Main FIRMWARE check : NOT PRESENT
Graphic controller FIRMWARE : ERROR
F1=MSP F2=ASP F3=MemoCARD ENTER=Prj
MEMORY CARD MENU
F1= Backup ALL F5= Restore ALL
F2= Backup FW/PRJ F6= Restore FW/PRJ
F3= Backup RECIPES F7= Restore RECIPE
F4= Backup ALARMS F8= Restore ALARMS
F9= EXIT
To Next Page
Loading...
