405.1200.037.2 - Rel.: 2.21 of 25/02/2008
36-13
When you press the next message is displayed:
When you press the first message is displayed again:
VT190W
info-messages
Format:
• Two rows of 40 characters for the text of the message.
• One row for any data field (which in that particular situation could indi-
cate a safety or warning limit value).
• One row for the date and time the signal occurred.
• The first display is indicated by two characters [**] on the far right of the
third line of the display. These symbols are not present if the message
appeared the last time the display mode for information messages was
accessed.
Example with two messages.
When you press the next message is displayed:
Pressure exceeds
safety limit
First message
125.5 **
01/07/1998 10:45
PgDn
Water level lower
than work threshold
Second message
40 **
01/07/1998 10:46
PgUp
Pressure exceeds
a limit
First message
125.5 **
01/07/1998 10:45
The pressure in the tank exceeds
first warning limit
First message
125.5 **
01/07/1998 10:45
PgDn
The water level is lower than the
threshold enabling work to proceed
Second message
40 **
01/07/1998 10:46
To Next Page
Loading...
