CHAPTER 20
Video terminal VT525W
405.1200.037.2 - Rel.: 2.21 of 25/02/2008
20-24
and you will see
There is one of these pages for each communication port; movement
between the various pages is effected by pressing .
From this page you can:
• Set the clock and the contrast
• Prepare the VT to receive the program
Setting the clock and the contrast:
To set the clock and the contrast, while displaying the above illus-
trated page, press ; the following mask appears
PROG
ESC
Port : xxxxxxxxxxxxxxxxxxxxx
Ver : xxxxxxxxxxxxxxxxxxxxx
Addr VT : xxxxxxxxxxxxxxxxxxxxx
Error : xxxxxxxxxxxxxxxxxxxxx
Driver : xxxxxxxxxxxxxxxxxxxxx
TRAN
PAGE
PROG
ESC
SET CONTRAST : ±##
SET CLOCK :
ddd,dd/mm/yy
hh:mm:ss
To Next Page
