ESA VT50 - Page 443

405.1200.037.2 - Rel.: 2.21 of 25/02/2008
22-15
Setting the clock and the contrast:
To set the clock and the contrast, while displaying the above illus-
trated page, press ; the following mask appears
To set the contrast touch the words SET CONTRAST on the display;
you will see the following mask
Use the arrow for any variation (see
“Chapter 37 -> Operation of
terminal with touch screen“
).
To set the clock touch the words SET CLOCK on the display; the
following mask appears
For the clock to be used properly, a special battery has to be
inserted in the terminal (see
“Chapter 34 -> Video terminal
PROG
ESC
SET CONTRAST : ±##
SET CLOCK :
ddd,dd/mm/yy
hh:mm:ss
ESC
CONTRAST : ±##